Home

Forklift and Lift Truck You are here

Legal for Trade

Hay Squeeze

General Features Most user-friendly system available with built-in troubleshooting diagnostics and our toll-free technical support line. Load Sensors made from ISO 9000 17.4 Stainless Steel using only temperature compensated strain gage technology. System is designed to work in the harshest environments, dependably and accurately. Accurate and requires on average only 2 hours for installation. Accumulation feature allows operators to either count up for total or display single load weight. Remote Accumulator Switch accessory available. RS232 Printer accessory available providing for date, time and accumulated, loaded weight.

Technical Features Input Power - Voltage: 12Vdc +/-5% Input Power - Current/Amps: Maximum: 500mA  Input Power - Current/Amps: Nominal: 100mA + 30mA per 350 Ohm transducer Excitation Voltage: 10Vdc Maximum Transducers: Four (4) 350 Ohm Transducers Operating Temperature: 14F to104F (10C to 40C) Display Technology: 5 1/2 digit LCD 3/4" height Control Panel Key Functions: lb/kg. Zero, Net/Gross, Tare, Print Serial Port: Full Duplex RS-232 format Housing Material: Black ABS Weight: 1 lb. 6oz. Shipping Weight: 2 lb. 4oz.

• The American Forklift Scales onboard hydraulic weighing system determines the load weight by sensing the hydraulic pressure needed to extend the lift cylinder for raising the forks.

• The heavier the load, the greater the pressure in the hydraulic line.

• This signal is transmitted to the In-Cab meter, which displays the weight on the forks.

 
• Accuracy and Repeatability are affected by consistency of operation and condition of lift system